Real-Time Executive Protection

MOSS Kit rapid-deployment sensors for real-time executive protection

Executive protection teams often work in venues they don't control. A hotel ballroom rented for one evening, a private estate visited once, a staging area with no time for a permit or a trenching crew. The MOSS Kit is built for exactly that constraint: a rapid-deployment sensor kit. A two-person team gets full perimeter coverage in minutes, with no cabling, no power supply, and no site survey required.

Key Takeaways

  • Deploys in under 5 minutes, no trenching, cabling, or installer required.
  • Wireless range: up to 250m indoors, 1km outdoors, alerts arrive in real time.
  • Mixes seismic, infrared, and radar sensors in one kit for mixed sites.
  • Fits in one weatherproof case a two-person team can carry and deploy.

Why Executive Protection Teams Need Rapid, No-Infrastructure Detection

Threats against senior executives have risen sharply. A 2025 analysis by the Security Executive Council and Mercyhurst University covered 424 documented incidents from 2003 through 2025. It found that incident volume doubled year over year by October 2025, the highest level on record (Security Executive Council via ASIS Online, 2026). That trend is pushing protection teams toward faster, more flexible deployment models.

Advance teams typically survey a venue 24 to 48 hours before a principal arrives. They often spend 10 to 12 hours scouting a single location (MPS Security, 2026). A detection system that needs trenching, cabling, or a permit request doesn't fit that timeline. MOSS was built around that constraint. Sensors go in the ground or against a wall in minutes, not days, and come back out again just as fast when the detail moves on.

How Does the MOSS Kit Deliver Coverage in Minutes?

The MOSS Kit pairs wireless seismic, infrared, and radar sensors with a handheld app. A two-person team can stand up full coverage on arrival at a new site. Every sensor reports to a central HUB gateway over long-range wireless, and the operator sees alerts on a map within seconds of a trigger.

How Fast Can You Deploy It?

Setup takes under 5 minutes, with no trenching, cabling, or power supply required. The full kit, five sensors, a HUB gateway, and a rugged handset, ships in a single weatherproof case. A two-person team can carry it to a new site and have coverage live before the rest of the detail finishes unloading.

Built for Indoor and Outdoor Details

Security threats don't stay in one place, and neither does the MOSS Kit. It's designed for both indoor and outdoor use, whether that's a high-profile event, a construction site, or a VIP detail moving between venues. Its modular design lets the team mix and match sensor types for whatever the mission requires.

MOSS Outdoor sensor deployed for perimeter detection
Full situational awareness within minutes, no infrastructure, no power supply, no delay.

How Do Alerts Reach the Team in the Field?

When a sensor detects an intrusion, it sends an instant alert directly to the team's smartphone receiver. Each unit reports over LoRA wireless, up to 250m indoors or 1km outdoors, to a HUB gateway that relays the detection in real time. The ruggedized handset, running the SG-Patrol app, becomes the team's command center. It shows an audible alarm, the precise location, and the type of alert received, so the team can respond right away.

Portable Enough to Move With the Detail

Executive protection work rarely stays in one location, and the MOSS Kit is built to move with it. Its ruggedized, waterproof case and compact components make it easy to transport and redeploy. That holds whether the detail is working an urban venue or a remote site.

Which Sensor Fits Which Location?

A typical MOSS kit ships with five AIO 2 seismic sensors for open-ground coverage. Any slot can be swapped for TACT-PIR or TACT-RADAR to cover indoor points instead. All three share the same wireless backbone, so they mix freely within one deployment.

MOSS Indoor sensor for temporary indoor security
SensorDetection TypeRangeBest For
AIO 2Seismic (footsteps, vehicles, digging)18m footsteps / 35m vehicles & digging, 360°Open outdoor grounds
TACT-PIRPassive infrared motion10m, 90° field of viewIndoor rooms and hallways
TACT-RADARRadar motion5m, 360°Tight indoor spaces where PIR's view is too narrow

Frequently Asked Questions

How fast can an executive protection team deploy MOSS?

MOSS sensors deploy in under 5 minutes with no trenching or cabling required. The kit ships in a single weatherproof case with five sensors, a HUB gateway, and a rugged handset, so a two-person team can establish coverage on arrival at a new location.

How does the team receive alerts in the field?

Each sensor reports to the HUB gateway over LoRA wireless, up to 250m indoors or up to 1km outdoors, which relays every detection to the SG-Patrol handset in real time, so the operator sees an alert on the map within seconds of a sensor triggering.

Can MOSS be used both indoors and outdoors on the same detail?

Yes. The AIO 2 seismic sensor covers outdoor ground movement up to 35m, while TACT-PIR adds indoor motion detection out to 10m and TACT-RADAR covers tighter indoor spaces where PIR's field of view is too narrow. All sensor types share the same wireless backbone and mix freely within one kit.

Related Posts

Ready to Strengthen Your Perimeter?

Our experts can help you choose the right security solution for your site

Talk to an Expert